Zenport DPG60 Zen-Tek Dry Air Pressure Gauge, 60 PSI

These 2.5 Inch gauges are really easy to read from a reasonable distance. And the price for the quality is at a very nice point. If you have the room for a largish pressure gauge I certainly reccomend this size. The gauge appears to be accurate - It tracked against another gauge when I was comparing them.The only negative I have is that these gauges have no damping. If you use it with a tankless type compressor there is a lot of pulsation in the output air and the needle will vibrate quite visibly even downstream of a regulator. For that application I was concerned that the constant vibration of the gauge might eventually lead to west-out failure of the gauge, thought there was no problem while I was testing it.In extreme cases with pulsating air pressure the only common fixes I know of are:You can use a liquid filled pressure gauge that damps out the movement.You can add some sort of tank ahead of the gauge and user that will absorb the pressure fluctuations.You can have a very small orfice in the feed to gauge that averages out the pressure for the gauge.Or you can ignore the vibrating needle and hope the gauge does not wear out.On the plus side the gauge is easy to read and a good value at the price I paid. It is exact what it is advertised to be, no more, no less.On the “could use improvement side” I wish these gauges had some damping. But unless you are using a tankless air compressor it’s not an issue.

This is for the 0-60 PSI air pressure gauge.I was excited that this would ready within 1.6% accuracy for the price, but this turned out to be completely inaccurate. Using a known calibrated gauge at 10 PSI this gauge registered 6 PSI which is 40% off. Then I raised the pressure to 15 PSI on the calibrated gauge to only reach 11 PSI on this gauge which is an error of 26.6667%. At 30 PSI on the calibrated gauge we're at 26 PSI on this gauge. The pattern appears to be 4 PSI off. This gauge will never achieve its stated claim of 1.6% Grade A accuracy of 1.6%.You get what you pay for I guess. I hope this helps others who might be hoping for this to be accurate. I could offset my pressure by 4 PSI but that's only for this gauge I tested. Who knows what you'll get considering the wild claim of Grade A."About this itemDry 0-60 psi utility air pressure gauge2.5-inch (63.5mm) diameter ABS case with 372 plastic window0.25-inch national pipe thread bottom connection and brass internals and connectionGrade A accuracy of 1.6% full rangeHigh visibility dial face and numbers"Summary: The item listed claims a Grade A accuracy of 1.6% full range and is absolutely not even close when tested with a known calibrated gauge.

I can't say whether it is highly accurate or not as that isn't relevant for our use. However, I can say that it arrived when expected and works beautifully for my son's air powered rocket launcher. I love the large type for seeing whether they are pumping it up to a ridiculously high air pressure without needing to be right next to it. I don't know how durable it is, but so far it has handled being knocked around a lot by a bunch of rowdy kids and has been left out in the rain two days straight and it still works great.

I use this to ferment beer in a keg under pressure The gauge isn't 100% accurate but for the price and what I use it for it's good enough for me. I would say +/- 2-3 . In the ball park for what I'm doing.

Good item

UPDATE: I originally had given it one star for not working.Well it works just fine. I accidentally installed a check valve backwards.

Flw regulator for gases co2 nitrigen helium mixed gases.

To monitor aa tank less air compressor

I dropped my Moroso tire gauge a broke it so I replace the gauge with one of these , I find it easy to read and is off by a pound or two at 40 psi , but that is what I found , with my other gauge , still works great , happy and use it all the time

Recomendable, buen artículo

This gauge works when pressures are over 10-15 PSI but doesn't register accurately below that.

Very inaccurate. Reads 8 psi on a manifold supplied with 12psi. I do not recommend this product

Je recommande l'article, il fait le travail.